HOW TO SET UP THE DA MINI DISPENSER

INSERT THE BATTERIES

Your dispenser includes 2 AA batteries. Insert them following the instructions on the dispenser.

HOW TO INSERT THE REFILL

Open the front side of the dispenser by pressing the "open" button on the side. Use the remote control to push all the way up the mechanical trigger.

Hook the dispenser to the Aroma Refill, fitting the edge of the can to the corresponding ring. Close the cap (the side that says "open" should be next to the DA logo.)

HOW TO PROGRAM THE MINI DISPENSER

On the remote control, press ON (a perfumed spray will come out), select the time interval between sprays (to start, we recommend every 20 minutes) and for the number of sprays at once (we recommend 1) - You will hear a "beep" after each click.

WHERE TO PLACE THE DISPENSER TO PERFUME YOUR HOME: (VERTICAL FILTER)

Place the aroma refill and dispenser facing the A/C filter in a way that when spraying will moist as much surface of the filter as possible.

We recommend mounting the dispenser on the wall. Use the screws that come with your device.

Where to place the dispenser to perfume your home (Horizontal Filter)

Place the Aroma Refill and the dispenser standing under the filter, in a way that when spraying will moist as much surface of the filter as possible. This is, in a corner or even beyond the projection of the filter in the floor. The air flow will transport the perfume.

Note: Never place the filter laying flat.
Place the dispenser on the floor, or if possible, mounted on the wall with the screws included in your package.

TIP:You can press TEST whenever you want an extra spray (i.e. guests arrived and you cooked something with a strong scent) 

TIP: To keep your house consistently perfumed, keep the FAN in the thermostat in the ON mode (as opposed to AUTO), so you always have a continuous (and scented) airflow.

To stop it whenever you want (i.e. You are not home, you don't want to sleep with perfume, etc.) just press OFF.

To activate it again, press ON and indicate the interval and number of sprays again (step number 4).