How to install the DA Mini Dispenser

 

How to place the batteries: 

Your dispenser includes 2 AA batteries. Insert them following the instructions on the dispenser.

How to insert the refill:

Open the front side of the dispenser by pressing the "open" button on the side.

Use the remote control to open the mechanical trigger.

Hook the dispenser to the Aroma Refill, fitting the edge of the can to the corresponding ring.

Close with the cap (the side that says "open" should be next to the DA logo.)

Where to place the dispenser to perfume your home: (vertical filter)

Place the aroma refill and dispenser facing the A/C filter.
We recommend mounting the dispenser on the wall. Use the screws that come with your device.

 

Where to place the dispenser to perfume your home : (horizontal filter) 

Place the Aroma Refill and the dispenser standing under the filter. The air flow will transport the perfume.

Note: Never place the filter laying flat.
We recommend mounting the dispenser to the wall. Use the screws that come with your device.

How to program the Mini dispenser.
On the remote control, press ON (a perfumed spray will come out), select the time interval between sprays (to start, we recommend every 20 minutes) and for the number of sprays at once (we recommend 1) - You will hear a "beep" after each click

 

TIP: To keep your house consistently perfumed, keep the thermostat in FAN mode, so you always have a continuous (and scented) airflow.

TIP: You can press TEST whenever you want an extra spray (i.e. guests arrived and you cooked something with a strong scent) 

 

To stop it whenever you want (i.e. You are not home, you don't want to sleep with perfume, etc.) just press OFF.

To activate it again, press ON and indicate the interval and number of sprays again (step number 4).

 

How to install the DA Pro Dispenser